Document Type
Report
Publication Date
4-1978
Abstract
Hydrothermal alteration in drill cuttings from Thermal Power drillhole 14-2, Roosevelt Hot Springs Thermal area, has been studied petrographically. The hole is sited in alluvium approximately 1.6 km southeast of the old Resort and was rotary drilled to a depth of 1866.0 m. The exact hole location is 2310 FNL, 350 FWL, Sec. 2, Twp 27S, Rge 9W, elevation 1908.5 m. Core was extracted from 792.5 to 795.5 m. Thin sections were made from samples 15.2 m intervals of drill cuttings collected at 1.5 or 3.0 m intervals during drilling. Thin sections were made of 1.5 or 3.0 m intervals from 274.3 to 304.8 m, 487.9 to 581.2 m, and 868.7 t o 899.2 m. These intervals were chosen for close spaced sampling on the basis of increases in temperature, porosity, conductivity and acoustic velocity shown in geophysical logs. A total of 153 thin sections of cuttings were made, and an additional 9 sections were made from the core. Depths of thin section samples are listed in the appendix. A visual estimate of the percentage of each rock type was made for each thin section.
Recommended Citation
Ballantyne, J. M. and Parry, W. T., "Hydrothermal alteration at the Roosevelt hot springs thermal area, Utah: Petrographic characterization of the alteration to 2 kilometers depth" (1978). All U.S. Government Documents (Utah Regional Depository). Paper 275.
https://digitalcommons.usu.edu/govdocs/275
Comments
Report: Technical 78-1701-a.1.1
Contract: EG-78-C-07-1701
Agency: DOE/DGE