Description
This data was used in an attempt at system identification for rudderless aircraft using simulation.
OCLC
1236227276
Document Type
Dataset
DCMI Type
Dataset
File Format
.txt, .csv, .json
Viewing Instructions
How to use the files for Pylot and MachUpX can be found at: https://aerolabpylot.readthedocs.io/en/latest/ for Pylot and at: https://machupx.readthedocs.io/en/latest/ for MachUpX.
Publication Date
2-5-2021
Funder
Office of Naval Research
Publisher
Utah State University
Award Number
Office of Naval Research N00014-18-1-2502
Methodology
This data was collected using USU Aerolab "Pylot" simulator and "MachUpX"
Referenced by
Thurgood, Jaden, "Sensitivity and Estimation of Aerodynamic, Propulsion, and Inertial Parameters for Rudderless Aircraft Using Simulation" (2021). All Graduate Theses and Dissertations. 8043. https://digitalcommons.usu.edu/etd/804
Language
eng.
Code Lists
See the README.txt file for column headings.
Disciplines
Aeronautical Vehicles | Aerospace Engineering | Engineering
License
This work is licensed under a Creative Commons Attribution 4.0 License.
Identifier
https://doi.org/10.26078/d71p-9a11
Recommended Citation
Thurgood, J. (2021). Aircraft Input Files for Pylot and MachUpX. Utah State University. https://doi.org/10.26078/D71P-9A11
Checksum
b6161700734c561cbf374a046f4c40b2
Additional Files
README.txt (2 kB)MD5: 154ec241a564446aea11f2e057b905c6
baseline_aircraft_controls_all_maneuvers.csv (6135 kB)
MD5: b1014cf554482a9e56286bc90efb99d8
baseline_aircraft_parameters.json (3 kB)
MD5: 859d1492243955c19666039fef9d2fc8
time_sequence_state_input_all_maneuvers.json (1 kB)
MD5: ac54fdc95ac82845cc036bb6dde3db1f
Baseline_Aircraft.json (3 kB)
MD5: f832201e758ff406066b70f4c16f8c09
Baseline_Aircraft_Input.json (1 kB)
MD5: e7e2d3422e5957f84227fff59eeb3cf5
Comments
File descriptions:
"baseline_aircraft_controls_all_maneuvers" contains the controls of the simulator over time.
"baseline_aircraft_parameters" describes the aircraft file for the pylot simulator.
"time_sequence_state_input_all_maneuvers" is the input file to run the pylot simulator.
"Baseline_Aircraft" describes the geometry of the aircraft for the MachUpX tool.
"Baseline_Aircraft_Input" is the input file to run MachUpX