Session
Session VIII: Advanced Concepts II
Location
Utah State University, Logan, UT
Abstract
In this contribution, we present a CubeSat-compatible on-board computer (OBC) architecture that offers strong fault tolerance to enable the use of such spacecraft in critical and long-term missions. We describe in detail the design of our OBC’s breadboard setup, and document its composition from the component-level, all the way down to the software level. Fault tolerance in this OBC is achieved without resorting to radiation hardening, just intelligent through software. The OBC ages graceful, and makes use of FPGA-reconfiguration and mixed criticality. It can dynamically adapt to changing performance requirements throughout a space mission.
We developed a proof-of-concept with several Xilinx Ultrascale and Ultrascale+ FPGAs. With the smallest Kintex Ultrascale+ KU3P device, we achieve 1.94W total power consumption at 300Mhz, well within the power budget range of current 2U CubeSats. To our knowledge, this is the first scalable and COTS-based, widely reproducible OBC solution which can offer strong fault coverage even for small CubeSats. To reproduce this OBC architecture, no custom-written, proprietary, or protected IP is needed, and the needed design tools are available free-of-charge to academics. All COTS components required to construct this architecture can be purchased on the open market, and are affordable even for academic and scientific CubeSat developers.
Fault Tolerant Nanosatellite Computing on a Budget
Utah State University, Logan, UT
In this contribution, we present a CubeSat-compatible on-board computer (OBC) architecture that offers strong fault tolerance to enable the use of such spacecraft in critical and long-term missions. We describe in detail the design of our OBC’s breadboard setup, and document its composition from the component-level, all the way down to the software level. Fault tolerance in this OBC is achieved without resorting to radiation hardening, just intelligent through software. The OBC ages graceful, and makes use of FPGA-reconfiguration and mixed criticality. It can dynamically adapt to changing performance requirements throughout a space mission.
We developed a proof-of-concept with several Xilinx Ultrascale and Ultrascale+ FPGAs. With the smallest Kintex Ultrascale+ KU3P device, we achieve 1.94W total power consumption at 300Mhz, well within the power budget range of current 2U CubeSats. To our knowledge, this is the first scalable and COTS-based, widely reproducible OBC solution which can offer strong fault coverage even for small CubeSats. To reproduce this OBC architecture, no custom-written, proprietary, or protected IP is needed, and the needed design tools are available free-of-charge to academics. All COTS components required to construct this architecture can be purchased on the open market, and are affordable even for academic and scientific CubeSat developers.
