Session
Technical Session II: Year in Review
Location
Utah State University, Logan, UT
Abstract
R3 is a 3-U CubeSat launched on a RocketLab Electron into a 500 km circular orbit at 85° inclination on December 16th, 2018. The spacecraft flies a multispectral sensor that takes data in the six Landsat visible and near infrared bands. The R3 sensor mates a custom refractive telescope with a Materion Precision Optics Landsat filter, and an ON Semiconductor fast-framing high-sensitivity Si CMOS array, to produce 50-km wide, 44-m resolution Landsat-like image strips. Data are taken in push-broom mode and are downlinked via a 100Mbps compact lasercom system. Frames are then co-added on the ground in time-delay-integration (TDI) fashion to increase signal-to-noise ratio and create multi-spectral Earth images from the compact sensor. The system is an engineering concept demonstration of a compact multispectral sensor in CubeSat form. We describe our ConOps, flight operations, sensor focus and alignment, initial imaging check out, and initial comparisons of R3 data to Landsat-8 imagery of the same Earth locations. RGB, color infrared, and normalized differential vegetation index (NDVI) products are compared between CUMULOS and Landsat-8. Results show good multispectral image quality from the CubeSat sensor, and illustrate the ability of R3 to detect vegetation and other features in a manner similar to Landsat, as well as the challenge in perfectly exposing all 6 VIS/NIR Landsat bands using our commercial 10-bit CMOS array. We also highlight the performance of the compact laser communications system which enabled the successful performance of this mission.
Landsat Imagery from a CubeSat: Results and Operational Lessons from the R3 Satellite's First 18 Months in Space
Utah State University, Logan, UT
R3 is a 3-U CubeSat launched on a RocketLab Electron into a 500 km circular orbit at 85° inclination on December 16th, 2018. The spacecraft flies a multispectral sensor that takes data in the six Landsat visible and near infrared bands. The R3 sensor mates a custom refractive telescope with a Materion Precision Optics Landsat filter, and an ON Semiconductor fast-framing high-sensitivity Si CMOS array, to produce 50-km wide, 44-m resolution Landsat-like image strips. Data are taken in push-broom mode and are downlinked via a 100Mbps compact lasercom system. Frames are then co-added on the ground in time-delay-integration (TDI) fashion to increase signal-to-noise ratio and create multi-spectral Earth images from the compact sensor. The system is an engineering concept demonstration of a compact multispectral sensor in CubeSat form. We describe our ConOps, flight operations, sensor focus and alignment, initial imaging check out, and initial comparisons of R3 data to Landsat-8 imagery of the same Earth locations. RGB, color infrared, and normalized differential vegetation index (NDVI) products are compared between CUMULOS and Landsat-8. Results show good multispectral image quality from the CubeSat sensor, and illustrate the ability of R3 to detect vegetation and other features in a manner similar to Landsat, as well as the challenge in perfectly exposing all 6 VIS/NIR Landsat bands using our commercial 10-bit CMOS array. We also highlight the performance of the compact laser communications system which enabled the successful performance of this mission.
