Session

Flash Talks Session 5

Location

Salt Palace Convention Center, Salt Lake City, UT

Abstract

As electric propulsion has become a core part of space systems, from CubeSats to flagship missions, commercial implementation and academic development of such systems has seen immense success over the past few years. Yet, current educational and demonstrational units for electric thrusters are sparse, costly and hard to implement in student-focused environments. This paper introduces E-SPARK (Electric Small Propulsor for Accessible Research and Knowledge), a low-cost “plug and play” Hall-Effect Thruster (HET) system designed for easy replication in academic settings, capable of sustained operation. We detail the process of architecting such a system, from first-principle scaling laws, design and fabrication, to modeling, running and performance characterization. Based on work done within a 10-week student internship program at the NASA Jet Propulsion Laboratory, we also explore how such a system has been developed within a period of time applicable to student-led project development. E-SPARK is a 100W, mN-range, 300V discharge permanent magnet HET capable of running at steady-state using argon as propellant. Electrons for plasma neutralization and start-up are provided via a simple, integrated thoriated tungsten wire cathode. The bench-sized system is based around an Ideal Vacuum cubic foot chamber paired with a HiCube HiPace 300 Turbomolecular pump, common power supplies and mass flow controller, all interfaced through LabVIEW for simple operation of supplies and data acquisition. All thruster elements were designed using Autodesk Fusion and machined with JPL’s Electric Propulsion (EP) group machine shop. Version 0 of the thruster failed to reach thermal steady-state, which required the development of a radiator for Version 1, with thermal simulations performed using Ansys Mechanical. This final version was successfully run at steady state for multiple runs, the longest being around 90 minutes, with visually symmetric plasma and overall smooth discharge. The unit is currently hosted within the EP group, with future potential uses in plasma probe testing, studies of facility effects on performance, or public engagement within the JPL campus and Pasadena area schools or universities.

Document Type

Event

Share

COinS
 
Aug 26th, 3:30 PM Aug 26th, 4:15 PM

Development and Characterization of the E-SPARK Hall-Effect Thruster System

Salt Palace Convention Center, Salt Lake City, UT

As electric propulsion has become a core part of space systems, from CubeSats to flagship missions, commercial implementation and academic development of such systems has seen immense success over the past few years. Yet, current educational and demonstrational units for electric thrusters are sparse, costly and hard to implement in student-focused environments. This paper introduces E-SPARK (Electric Small Propulsor for Accessible Research and Knowledge), a low-cost “plug and play” Hall-Effect Thruster (HET) system designed for easy replication in academic settings, capable of sustained operation. We detail the process of architecting such a system, from first-principle scaling laws, design and fabrication, to modeling, running and performance characterization. Based on work done within a 10-week student internship program at the NASA Jet Propulsion Laboratory, we also explore how such a system has been developed within a period of time applicable to student-led project development. E-SPARK is a 100W, mN-range, 300V discharge permanent magnet HET capable of running at steady-state using argon as propellant. Electrons for plasma neutralization and start-up are provided via a simple, integrated thoriated tungsten wire cathode. The bench-sized system is based around an Ideal Vacuum cubic foot chamber paired with a HiCube HiPace 300 Turbomolecular pump, common power supplies and mass flow controller, all interfaced through LabVIEW for simple operation of supplies and data acquisition. All thruster elements were designed using Autodesk Fusion and machined with JPL’s Electric Propulsion (EP) group machine shop. Version 0 of the thruster failed to reach thermal steady-state, which required the development of a radiator for Version 1, with thermal simulations performed using Ansys Mechanical. This final version was successfully run at steady state for multiple runs, the longest being around 90 minutes, with visually symmetric plasma and overall smooth discharge. The unit is currently hosted within the EP group, with future potential uses in plasma probe testing, studies of facility effects on performance, or public engagement within the JPL campus and Pasadena area schools or universities.